Need help?Do you have a question about the Intense 951 Series and is the answer not in the manual?
Information on converting wheels to tubeless setup.
Instructions for removing wheels and preparing the bike for assembly.
Guide to correctly installing the handlebars onto the stem.
Steps to release the dropper post and remove the bike from its packaging.
Instructions for mounting the rear derailleur onto the frame.
Procedure for properly installing the rear wheel onto the bike.
Steps to install the front wheel into the fork.
How to check and adjust the bike's gear system after assembly.
Instructions for adjusting the headset and aligning handlebars.
Guide to setting the correct saddle height for riding comfort.
Recommendations for checking and setting ideal tire pressure.
Final checks and adjustments before riding the bike.
Detailed guide for setting up the front suspension sag and rebound.
Instructions for setting up the rear shock sag and rebound.
Step-by-step instructions on how to adjust the bike's flip chip.
Specific guidelines for cleaning and maintaining the carbon frame.
To Next Page
General
