intensity KJR-86C-E - Other Precautions; Installation Location; Preparation Before Installation

4
Installation Location
Do not install the unit in a place with much oil, steam, sulfide gas.
Otherwise, the product may deform and fail.
Preparation before installation
1. Check whether the following assemblies are complete.
1
2
3
4
5
1
2
2
1
1
No. Name
Qty. Remarks
Wired remote Controller
Installation & owner’s manual
II.OTHER PRECAUTIONS

Plastic screw bar
For installing the wire controller on
the electrical box
For installing the wire controller on
the electrical box
Connecting wires of signal
receiving panel
For connecting the signal receiving
panel with the 4-core shielding wire
M4×25 Cross head
screwdriver