Intenso MB1 - Disposal; Service;Distributor

EN - Page 5 of 5
SERVICE/DISTRIBUTOR
INTENSO INTERNATIONAL GMBH I Kopernikusstraße 12-14 I D-49377 Vechta
Email (technical support): support@intenso-internaonal.de
Email (RMA number): rma@intenso-internaonal.de
Internet: www.intenso.eu
Telephone (technical support): +49 (0) 4441 – 999 111
(Mon. – Thur. 09:00 – 16:30;
Fri. 09:00 – 14:00)
DISPOSAL
OPERATING CONDITIONS
Operate the device at 0 to 35 degrees Celsius and a maximum humidity of 85%.
TECHNICAL SPECIFICATIONS
Disposal of old electronic equipment:
The devices marked with this symbol are subject to the European
Direcve 2012/19/EC. All electrical appliances and old electrical ap-
pliances must be disposed of separate from the municipal waste
stream via designated collecon facilies appointed by the govern-
ment or the local authories. You avoid environmental damage with
the proper disposal of old electrical equipment.
Packaging:
Packaging is raw material. The packaging material of this product
is suitable for recycling and can be re-used. Please pay aenon
to the local recycling provisions when disposing of any materials.
Dimensions (diameter/height): 58 mm / 6,8 mm
Weight: ~65 g (incl. cable)
Power supply:
Quick Charge Power Supply HP8 – 5V-3A,
9V-3A, 12V-2.5A, 15V-2A, PD3.0, QC 3.0
Current consumpon
(compable power supplies):
9V-2A, 12V-1.5A, PD 3.0, QC 3.0 quick
charge power supply
Charging current output:
5, 7.5, 10 & 15 was (depending on the
device being charged)
Qi Version: Version 1.2.4
Frequency band: 110-205 kHz
Max. radiated transming power: 15 was
Overvoltage protecon, overheang
protecon, short-circuit protecon,
foreign object detecon:
Yes
Case-friendly:
Yes (depending on the material and
thickness of the case. Maximum 5 mm
and no metal)