Upright Bike
INTENZA_____ EQUIPMENT MAINTENANCE GUIDELINES UPRIGHT BIKE
9
•
DAILY
Wipe down console, seat and touchables with a soft lint—free cloth and neutral cleaner. DO NOT spray any
liquid directly at or onto any part of Intenza equipment
•
WEEKLY
Wipe all cover and pedal surfaces with a soft lint—free
cloth and neutral cleaner. DO NOT spray any liquid directly at or onto any part of Intenza equipment
•
MONTHLY
Vacuum around the unit and inside the cup holders
•
TOUCHABLES
Handlebars. HR Sensors. Seat Adjustment Lever
•
PLEASE NOTE
For conducting general basic maintenance technical skills are NOT required
•
CLEANING MATERIALS
PLEASE DO NOT use any type of window cleaner, soap, scouring powder or any other cleaner with solvents such as
benzene, ammonia or paint thinner to clean, sanitise or maintain Intenza products
IN ORDER TO CONDUCT GENERAL TECHNICAL MAINTENANCE, TECHNICAL SKILLS AND TOOLS FOR MAINTAINING AND
REPAIRING FITNESS EQUIPMENT ARE NECESSARY. REQUIRED TORQUE VALUES, BELT TENSIONS, ACCEPTABLE RANGES
FOR MENTIONED PARAMETERS AND MATERIAL SPECIFICATIONS (E.G.LUBRICANTS) ARE AVAILABLE ON THE INCARE
™
SUPPORT WEBSITE http://support.intenzafitness.com
GENERAL TECHNICAL MAINTENANCE
QUARTERLY
2
3
TOOLS
1 CHECK ALL CONSOLE SOFTWARE AND UPDATE IF NECESSARY INTERNET/USB
INSPECT CRANKS AND TIGHTEN IF LOOSE
INSPECT PEDAL TO CRANK CONNECTION. TIGHTEN IF LOOSE. REPLACE AS NECESSARY WRENCH AND PEDAL
4 INSPECT PEDAL STRAPS AND REPLACE AS NECESSARY PEDAL STRAP
WRENCH
YEARLY
1 INSPECT DRIVE BELT. ADJUST TENSION OR REPLACE AS NECESSARY BELT TENSION METRE, DRIVE BELT
450 SERIES. 550 SERIES
To Next Page
Loading...
Need help?
General
