INTENZA_____ EQUIPMENT MAINTENANCE GUIDELINES 550 GC SERIES
13
550GC Series
•
DAILY
Wipe down console (GC3), seat and touchables with a soft lint—free cloth and neutral cleaner. DO NOT spray
any liquid directly at or onto any part of Intenza equipment
•
WEEKLY
Wipe all cover and pedal surfaces with a soft lint—
free cloth and neutral cleaner. DO NOT spray any liquid directly at or onto any part of Intenza equipment
•
MONTHLY
Vacuum around the unit
•
TOUCHABLES
Handlebars. Handlebar Adjustment Lever. Bottle Holders. Seat. Resistance
Control Knob
•
PLEASE NOTE
For conducting general basic maintenance technical skills are NOT required
•
CLEANING
MATERIALS
PLEASE DO NOT use any type of window cleaner, soap, scouring powder or any other cleaner with
solvents such as benzene, ammonia or paint thinner to clean, sanitise or maintain Intenza products
IN ORDER TO CONDUCT GENERAL TECHNICAL MAINTENANCE, TECHNICAL SKILLS AND TOOLS FOR MAINTAINING AND
REPAIRING FITNESS EQUIPMENT ARE NECESSARY. REQUIRED TORQUE VALUES, BELT TENSIONS, ACCEPTABLE RANGES
FOR MENTIONED PARAMETERS AND MATERIAL SPECIFICATIONS (E.G.LUBRICANTS) ARE AVAILABLE ON THE INCARE
™
SUPPORT WEBSITE http://support.intenzafitness.com
GENERAL TECHNICAL MAINTENANCE
QUARTERLY
2
3
TOOLS
1 CHECK ALL CONSOLE SOFTWARE AND UPDATE IF NECESSARY INTERNET/USB
INSPECT CRANKS AND TIGHTEN IF LOOSE
INSPECT PEDAL TO CRANK CONNECTION. TIGHTEN IF LOOSE/REPLACE AS NECESSARY WRENCH AND PEDAL
4 INSPECT PEDAL STRAPS AND REPLACE AS NECESSARY PEDAL STRAP
WRENCH
YEARLY
1 INSPECT DRIVE BELTS. ADJUST TENSION OR REPLACE AS NECESSARY BELT TENSION METRE, DRIVE BELT
3 INSPECT BREAK PAD. ADJUST THE GAP WITH FLYWHEEL/REPLACE IF WORN OUT STANDARD TOOLS. BREAK PAD
2 INSPECT SEAT AND HANDLEBAR ADJUSTMENT LEVERS. STANDARD TOOLS
ADJUST TIGHTNESS FOR SMOOTH OPERATION
550 SERIES
To Next Page
Loading...
Need help?
General
