Escalate Stairclimber
INTENZA_____ EQUIPMENT MAINTENANCE GUIDELINES ESCALATE STAIRCLIMBER
3
•
DAILY
Wipe down console and touchables with a soft lint—free cloth and neutral cleaner. DO NOT spray any liquid
directly at or onto any part of Intenza equipment
•
WEEKLY
Wipe all cover and stair surfaces with a soft lint—free cloth
and neutral cleaner. DO NOT spray any liquid directly at or onto any part of Intenza equipment
•
MONTHLY
Vacuum
around the unit and inside the cup holders
•
TOUCHABLES
Handlebars. HR Sensors. Central Keypad. Rear Upright
Posts
•
PLEASE NOTE
For conducting general basic maintenance technical skills are NOT required
•
CLEANING
MATERIALS
PLEASE DO NOT use any type of window cleaner, soap, scouring powder or any other cleaner with
solvents such as benzene, ammonia or paint thinner to clean, sanitise or maintain Intenza products
IN ORDER TO CONDUCT GENERAL TECHNICAL MAINTENANCE, TECHNICAL SKILLS AND TOOLS FOR MAINTAINING AND
REPAIRING FITNESS EQUIPMENT ARE NECESSARY. REQUIRED TORQUE VALUES, BELT TENSIONS, ACCEPTABLE RANGES
FOR MENTIONED PARAMETERS AND MATERIAL SPECIFICATIONS (E.G.LUBRICANTS) ARE AVAILABLE ON THE INCARE
™
SUPPORT WEBSITE http://support.intenzafitness.com
GENERAL TECHNICAL MAINTENANCE
QUARTERLY
2
3
TOOLS
1 CHECK ALL CONSOLE SOFTWARE AND UPDATE IF NECESSARY INTERNET/USB
INSPECT CHAINS AND TRACKS. ADD LUBRICATION IF NECESSARY
VACUUM INSIDE FRONT AND BOTTOM COVERS TO REMOVE DUST BUILD—UP
SOLID GREASE
VACUUM CLEANER
YEARLY
1 INSPECT DRIVE BELT, ADJUST TENSION OR REPLACE AS NECESSARY BELT TENSION METRE, DRIVE BELT
2 REMOVE RESIDUAL GREASE/ACCUMULATED DEBRIS FROM TRACKS. ADD LUBRICATION SOLID GREASE
450 SERIES. 550 SERIES
To Next Page
Loading...
Need help?
General
