DIV-9123 Electronic Crossover
Specifications
ELECTRICAL
Crossover Mode 2-way stereo / 3-way mono
Crossover Frequency 80Hz to 8KHz (Sweepable)
Crossover Cutoff Slope 24dB/Octave
Subwoofer Frequency 60Hz to 250Hz (Sweepable) 24dB/Octave
High Pass Filter 30Hz, 18dB/Octave
Input Level/Connector 0dBu (0.775V rms)/Balanced XLR
Input Impedance 20KΩ active balanced
Maximum Input +20 dBu
Output Level/Connector 0dBu (0.775 Vrms)/Balanced XLR
Output Load Impedance 600Ω rated active balanced
Maximum Output +20 dBu
Frequency Response 20Hz – 20KHz (±1dB)
Distortion (THD) Less than 0.1%
Signal-to-Noise Ratio Greater than 75dB
GENERAL
Power Source 100-120 or 220–240VAC, 50/60Hz
Power Consumption 15 W
Power Switch Push-on/Push-off with integral LED
Weight 4 Kg (8.8 lbs.)
Dimensions 482 (W) x 44 (H) x 280 (D) mm
19 (W) x 1.75 (H) x 11 (D) inches
Specifications and design subject to change without notice for improvements.
11
To Next Page
Loading...