Need help?Do you have a question about the Inter-m M-500 and is the answer not in the manual?
Crucial safety instructions including electric shock, fire hazards, and proper handling advice.
Ensures stability and reliability with over-current, overheating, and DC detection protection.
Allows stereo amplifiers to be used for powerful monaural sound via mode switch.
LED displays show operating status, protection, clip, and signal levels on the front panel.
Amplifier designed for valuable saving in rack space and slim exterior view.
Prevents inrush current during turn-on with a circuit on primary power lines.
Controls power ON/OFF and indicates power status.
Red LED indicates soft-start or activated protection systems; no sound output.
Illuminates when distortion exceeds approximately 0.1%, indicating high input levels.
LEDs indicate output levels at –40dB and -20dB of rated power.
21-step detented controls adjust input signal levels for each channel.
Located on the sides for easy handling and transport of the amplifier.
Balanced combination jacks (XLR/Phone) for input signals, supporting Bridge/Parallel modes.
Dual five-way binding posts and speaker connectors for stereo or bridged modes.
Protects the set from overload/error by breaking the AC power source; resettable.
Connects the amplifier to an AC outlet for power supply.
Slide switch for selecting Bridged mono, Stereo, or Parallel operation modes.
Ensure unobstructed access for efficient cooling and fresh air intake.
Protects speakers by connecting a fuse in series if input capacity is lower than amplifier output.
To Next Page
General
