7
CLEANING OF HEADS AND TAPE PATH
Generally, it is sufficient to clean heads after every 10 hours of operation. However, all surfaces over
which tape travels should be cleaned before making high quality recordings.
1. Set the POWER switch to OFF and remove cassette door lid by pushing it up and then taking it out toward
the front side after opening the door.
2. Wipe the heads using a cleaning tip slightly moistened with commercially available head cleaner.
3. Wipe the capstan and pinch roller using another cleaning tip slightly moistened with the commercially
available rubber cleaner.
REC/PB HEAD
DECK 4
capstan
Pinch roller
EJECT
MAINTENANCE
To Next Page
Loading...
Need help?
General
