EasyManua.ls Logo

Inter-m PSI-5120 - Random; Group Up;Down; Display; Copy

Inter-m PSI-5120
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DIGITAL PA SYSTEM
15
PSI-5120/5240
REPEAT mode
- Repeated play is done for the music.
REPEAT 1 mode
- All music is repeatedly played for a disc.
REPEAT ALL mode
-All music is repeatedly played for 6 discs.
OFF mode
- All music in 6 discs is once played without repeated play before stop.
- 1CD/USB/DRP
Pressing the REPEAT button enables to change the mode to the order of OFF REPEAT 1 REPEAT ALL OFF.
REPEAT 1 function
- Playback the file selected repeatedly. The display shows ‘REPEAT 1’.
REPEAT ALL function
- Playback the whole disc repeatedly. The display shows ‘REPEAT ALL’.
OFF mode
- Playback the whole disc without repetition and then stops.
4) RANDOM
This function is used to randomly listen to music without any sequence.
- Pressing the Random button during stop enables to display “Random”. Press the ▶(PLAY) button
to play music with random sequence.
- Repeat play is also done according to the Repeat Mode.
- Pressing the Random button once again enables to release this function.
5) GROUP UP/DOWN
When files are saved with folders, you can select a folder with the GROUP UP/DOWN button.
- Press the GROUP / (UP/DOWN) button to select a folder and then the first track is played.
- The relevant group is displayed with “G#” in front for a track.
Play order and indication of Group (folder)
- For 1CD/6CD, music is played to the order of Number/Alphabet/Hangul (Korean character).
- For DRP, files copied in a CD is displayed with “G5”, files copied in USB with “G3” and REC files
with “G2” respectively.
- For USB, music is played to the order of Number/Alphabet/Hangul but such order may be
changed depending on status of the inner file system.
6) DISPLAY
- This is function used only in 1CD Function.
- Pressing the Display Mode button during play enables to display GROUP NAME/TRACK NAME/ALL
TRACK/TIME.
- You can check current status by using DISPLAY MODE button.
7) COPY
- CD COPY (for 1CD only)
This function is used to copy contents of CD to inner memory (DRP) or USB memory. When you play a
CD, CD copy is done at the same time.
PSI5120_E 2009.7.31 9:33 AM 페이지 18