PROGRAM TIMER
6
PW-6242B
15. AM/PM, HOUR/MIN, DAY BUTTON
It is a button used when setting the current time and scheduled time.
- AM/PM button sets up morning/afternoon, HOUR/MIN button sets up hour, minute, and second, and
D
AY button sets up day.
- If pushing the button during setting AM/PM, AM changes into PM and PM changes into AM.
- If pushing the button during setting HOUR/MIN, it is changed from HOUR input to MIN input and from
MIN input to HOUR input.
- If pushing the button more than 2 seconds during setting MIN, it moves into second setting.
- If pushing the button during setting day, it changes into the next day.
16. CANCEL BUTTON
It is a button used when canceling during setting.
- If pushing the button during setting, the setting is not saved and it moves into the default status.
- If pushing the button during verifying the schedule, it moves into the default status.
- If pushing the button during playing MELODY, the sound source stops and it moves into the default status.
17. DIGIT BUTTON
It is a button used when selecting time setting, track input and channel. You can enter the digit from 0 to 9.
18. ENTER BUTTON ( )
It is a button used when saving the set content or performing the function.
- When completing the setting and pushing the button, the set content is saved and it moves into the default
status.
- If pushing the button during entering the set item, it sets the selected item and moves into the next
procedure.
- If pushing the button during setting MELODY play, the sound source plays.
19. DELETE BUTTON
It is a button used when deleting the scheduled content and file.
- If pushing the button at default status, it moves into sound source/scheduling deletion function.
- If pushing the button more than 2 seconds at default status, it moves into schedule deletion & day selection
modes.
20. COPY BUTTON
It is a button used when deleting the scheduled content and file. If pushing the button at default status, it
moves into sound source/scheduling copy function.
21. CH BUTTON
It is a button used when selecting the output channel in case of MELODY & VOICE scheduling and MELODY
PLAY operation. If pushing the button during scheduling, it moves into the item to select the output channel.
22. TRACK BUTTON
It is a button used when selecting the track in case of MELODY & VOICE setting.
- If pushing the button at default status, the number of total sound sources saved to the current SD Card
displays.
- If pushing the button more than 2 seconds at default status, it moves into sound source to be played setting
mode.
PW-6242B_MANUAL_141346_FOR.qxp_RFA 2017. 11. 13. 오후 4:52 페이지 6
To Next Page
Loading...
