PROFESSIONAL POWER AMPLIFIER
6
V2-1000/2000/3000/4000
7. POWER SWITCH
V
2-Series have a combination AC switch/circuit breaker. The position of this switch determines whether the AC
mains power is on or off. The power-on status is confirmed by the illuminated power indicator. Also this is
used for a circuit breaker to protect AC mains power and the amplifier from abnormal operations due to
overload or malfunction. If the current flows over the circuit breaker's rating, the circuit breaker is tripped.
You can switch on after abnormal situation released and then the amplifier will be recovered. Amplifiers are
always the last item in a system to be turned on. It is generally a good idea to reduce the level controls
before applying AC mains power.
To Next Page
Loading...
Need help?
General
