53
MOVING ON
Model 8520 Display Phone User Guide
TIP: To dial outside telephone numbers without first selecting an outgoing line,
enter a line access code (such as the Outgoing Call code “8”) before the outside
telephone number.
To view how your Station Speed-Dial keys are currently programmed:
1. With the handset in the cradle, dial .
2. Press the desired Station Speed-Dial key.
3. Press to exit.
To erase a Station Speed-Dial name and/or number:
1. With the handset in the cradle, dial .
2. Dial the desired location code (0-9) or press the desired Station Speed-Dial key.
3. Press repeatedly until the name is erased.
4. Press to continue.
5. Press repeatedly until the number is erased.
6. Press to exit.
Dialing Station Speed-Dial Numbers
NOTE: These instructions assume that you have already programmed the feature key
as a speed-dial key. See page 56 for instructions on programming your feature keys.
To dial a Station Speed-Dial number:
If necessary, select an outgoing line. You have the following options:
• To use a location number: Press
or dial and then enter the
desired Station Speed-Dial location number (0-9).
• To use a Station Speed-Dial key: Press the desired Station Speed-Dial key.
System Speed Dial
Your System Administrator can store up to 1000 speed-dial numbers in System
Speed-Dial locations 000-999.
To view and/or dial System Speed-Dial numbers:
1. Press or dial .
2. Dial the location code (000-999) for the desired number.
3. Press to dial the number.
3 9 6
#
3
8
3
MUTE
#
MUTE
#
STN SPDL
3
8
2
SYS SPDL
3
8
1
#
To Next Page
