Interacoustics AS608 - Air Conduction Testing; Headset Placement; Background Noise Considerations; Instruction for the Subject

D-0127810-A – 2020/05
AS608 - Instructions for Use - US Page 6
Marking
The following marking can be found on the instrument:
Symbol
Explanation
Type B applied parts.
Patient applied parts that are not conductive and can be immediately
released from the patient.
Refer to instruction manual
WEEE (EU-directive)
This symbol indicates that when the end-user wishes to discard this product,
it must be sent to separate collection facilities for recovery and recycling.
Failing to do so may endanger the environment.
0123
The CE-mark indicates that Interacoustics A/S meets the
requirements of Annex II of the Medical Device Directive
93/42/EEC. TÜV Product Service, Identification No. 0123,
has approved the quality system.
Year of manufacture
Do not re-use
Parts like ear-tips and similar are for single use only