EasyManua.ls Logo

Interacoustics AS608 - Reporting Imperfections and Faults

Interacoustics AS608
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D-0127810-A 2020/05
AS608 - Instructions for Use - US Page 26
PC Software / Interface: The Diagnostic Suite PC software with advanced reporting and printing features.
OtoAccess® and Noah compatible.
Distortion:
0,3% typical at full intensity.
1% maximum at full intensity.
Rise/fall Times:
35 msec. typically.
Display Header Indicators:
Tone On.
Patient Response.
Power/Battery Status
Batteries:
3 AA size, Alkaline type.
Automatic battery on/off switching.
Automatic battery status indication.
Battery life:
Standby: 6 months
Tone presentations: 70.000
External Power Supply (through USB connector):
Accepts 5 VDC minimum 150 mA
The recommended UE10WCP1-050200SPA (5 Volt, 2 A) is approved with the AS608/AS608e.
UE10WCP1-050220SPA: Input 100-240VAC 50/60 Hz, 500 mA, Output 5.0 V 2.0 A. (Class II)
Construction:
Plastic cabinet.
Dimensions:
WxDxH: 22.5 x 18 x 5.5 cm / 8,9 x 7.1 x 2,2 inches
Weight: 1.0 kg including batteries and headset.
1.6 kg including TC608 carrying bag incl. peltor noise reducing headset, audiogram charts etc.
Operating Environment:
Temperature: 15-35°C/59-95°F.
Relative Humidity: 30-90 %.
Air pressure 98 kPa to 104 kPa
Maximum altitude: 2000 m / 6561 ft above sea level
Storage Environment:
Temperature: 0-50°C/32-122°F.
Relative Humidity: 10-95 %.
Transport Environment:
Temperature: -20-50°C/-4-122°F.
Relative Humidity: 10-95 %.
Computer requirements:
Must comply with IEC 60950-1.
Equipped with a USB connection.

Other manuals for Interacoustics AS608

Related product manuals