MODE BUTTONS
The buttons below change the mode (device control) of the remote. Other than PC
mode, all of the buttons on the remote, except the power buttons, in TV, AUX, and
AV modes can be programmed. See the Programming the Remote section to learn
how to program the remote.
PC Change to PC Mode
TV Change to TV Mode
AUX Change to AUX Mode
AV Change to AV Mode
NUMERIC KEYPAD
The numeric keypad consists of numbers from 0 through 9 and two other keys:
ENTER and CLEAR. You can use the numeric keypad to type alphanumeric
characters anywhere in Media Center that you can enter text. If you want to delete
characters you have typed, press CLEAR; press ENTER to submit the characters
you have typed. You can also use the numeric keypad to enter TV channels.
TRIPLE TAP FUNCTION (Character Input)
For Windows Media Center only, each time you press a key, you scroll through the
characters that are available for that key.
To type text by using the numeric keypad
1. Press a number to scroll through the choices that are available for that key.
Each time you press that key, a different character appears. To backspace,
press CLEAR.
2. When the character your want is displayed, press ENTER.
XBOX or TELETEXT BUTTONS
Under PC mode, the red, green, yellow, and blue colored buttons and the
button on the bottom of the remote can be configured to work as special Xbox
buttons (default), or Teletext buttons (for use in Europe).
To Next Page
Loading...