Need help?Do you have a question about the Interflex IF-80 Series and is the answer not in the manual?
General| Display | TFT LCD |
|---|---|
| Power | 24 V DC |
| Memory | 512MB RAM |
| Operating System | Linux |
| Connectivity | Ethernet, USB |
| Operating Temperature | 0°C to 50°C |
| Protection Class | IP65 front |
Overview of IF-80x Outdoor terminals for access control and identification.
Lists the available versions of the IF-80x Outdoor terminals.
Details the items included in the delivery package for the IF-80x Outdoor terminal.
Identifies the intended audience for this technical document.
Specifies the intended purpose and restrictions for the IF-80x Outdoor terminals.
Covers critical safety information regarding electric shock and overvoltages.
Lists common abbreviations used throughout the document.
Specifies recommended cable types and maximum lengths for various connections.
Illustrates a typical system setup with the IF-80x Outdoor terminal and controller.
Provides a critical notice about terminal manipulation and data loss.
Provides recommendations for the installation site, including ambient conditions and distances.
Details minimum spacing requirements to prevent interference between devices.
Explains the procedure for securely attaching the back panel of the housing.
Provides detailed diagrams and instructions for mounting and routing cables.
Outlines the procedure for connecting the terminal to the I/O controller board.
Explains the function of different jumper settings on the I/O controller board.
Details the specific wiring connections required for the I/O controller board.
Provides steps for properly connecting the cable shield to the I/O controller board.
Shows circuit examples for connecting power, RS485, and sensors to the I/O board.
Illustrates connections for power, RS485, control elements, and door sensors.
Explains how to connect a second I/O controller board for expanded functionality.
Guides users on synchronizing the reader and setting the LED color via DIP switches.
Explains how to set the hardware address for readers on the I/O controller board.
Details the switch settings for configuring the hardware address of terminals.
Details the process of testing and configuring terminals using specific software.
Provides guidelines on maintenance and cleaning procedures for the terminals.
Warns about using inappropriate cleaning agents that can damage the terminal.
Describes the step-by-step procedure for opening and closing the terminal housing.
Lists specifications related to the power supply of the terminals.
Details the technical specifications of the terminal's equipment, such as reader and interfaces.
Provides general technical data including humidity, temperature, and dimensions.
Specifies the available color options and approximate weight of the terminal.
Instructs on the proper disposal of the device as electronic waste.
Presents the EU Declaration of Conformity for the product.
Presents the UK Declaration of Conformity for the product.
To Next Page
