Interflex IF-5725-0 Series - User Manual

Interflex Datensysteme GmbH 1/23
1 IF-57xx
Thank you for using an Interflex IF-57xx device for recording time and
access data.
2 Scope of Delivery
The following is included in the package:
§ IF-57xx master terminal
§ PoE terminal board
§ 14-pin ribbon cable
§ Metal back panel
§ Accessory bag with mortise lock and material for wall mounting
Please check the completeness and condition of the shipment upon
receipt.
3 Intended Use
The IF-57xx master terminal is used for recording time data as well as for
controlling access and locking devices. The device is designed for fixed
installation in dry rooms. Any other use is not in accordance with the
intended purpose and is therefore not permitted.
4 Storage
The device must be stored in a dry room.
5 IF-57xx Terminal Family
The IF-57xx terminal family consists of three different terminal types with the features described
below.
§ All terminals of this family can read data from state-of-the-art RFID credentials.
§ Power is supplied via a low-voltage power supply unit or PoE (e.g. injector).
IF-5735-0xxx:
§ records time data, such as e.g. IN/OUT bookings or absence reasons.
§ displays account information calculated by the IF-6020/IF-6040 system or provided by SAP.
§ takes over the functions of the time & attendance recording/access control program.
§ writes offline (NetworkOnCard) data onto credentials.
§ allows for connection of an I/O controller (optional, additional hardware required).
§ allows for connection of up to three slave terminals (optional, additional hardware required).
IF-5725-0xxx:
§ records time data, such as e.g. IN/OUT bookings.
§ displays account information.
§ takes over the functions of the time & attendance recording/access control program.
This master terminal:
§ does not write offline (NetworkOnCard) data onto credentials.
§ does not allow for the connection of slave terminals.
§ does not provide access with PIN verification.
§ does not allow for the connection of an interface expander.
LI-95-10307_V2016-10-11 IF-57xx
Zeiterfassungs- und Zutrittsterminal IF-57xx

Interflex IF-5725-0 Series Specifications

General

Brand	Interflex
Model	IF-5725-0 Series
Category	Touch terminals
Language	English

Summary

IF-57 xx Time and Access Terminal

IF-57 xx Product Overview

Introduction to the Interflex IF-57xx device for time and access data recording.

Scope of Delivery

Details the items included in the package for the IF-57xx terminal.

Intended Use

Specifies the intended purpose of the IF-57xx master terminal for time and access control.

Storage Guidelines

Provides instructions for storing the IF-57xx device in a dry room.

IF-57 xx Terminal Family

Describes the three different terminal types within the IF-57xx family.

IF-57 xx System Requirements and Safety

Shielded Cables Recommendation

Recommends using shielded cables for trouble-free operation of the IF-57xx.

Risk of Electric Shock and Safety

Details warnings and precautions regarding electric shock during installation and operation.

Installation Procedure

Step-by-step instructions for installing the IF-57xx terminal.

IF-57 xx Cabling and Power Supply

Cable Laying Guidelines

Provides guidance on routing and connecting cables for the IF-57xx system.

Electrical Connections and EMC

Notes on ensuring secure, reliable operation and compliance with EMC values.

Power Supply Options

Details the two ways power can be supplied to the device: external unit or PoE.

IF-57 xx Power and Cable Specifications

Power Supply via External Transformer

Describes how to supply power to the IF-57xx using an external transformer.

Power Supply via PoE

Explains the power supply method using Power over Ethernet (PoE).

RJ45 Patch Cable Pinout

Details the pin assignments and color coding for RJ45 patch cables.

IF-57 xx Cable Type Recommendations

Cable Types and Lengths

Lists recommended cable types and their permissible lengths for system components.

IF-57 xx Installation Details

Cable Types with Interface Expander

Specifies cable types for use with an interface expander for RS485 BUS and I/O controller.

Fastening the Back Panel

Instructions for securely fastening the back panel of the IF-57xx housing to the wall.

IF-57 xx Component Mounting and Configuration

Fastening PoE Terminal Board

Details how to attach the PoE terminal board to the back panel of the housing.

Plug-in Connection Details

Explains the 14-pin connector used for power and data lines between the terminal and board.

Setting the Network Address

Guides on setting the IP address for the IF-57xx terminal.

IF-57 xx LEDs and Switches

LEDs and Switches Overview

Identifies and describes the function of LEDs and switches on the IF-57xx terminal.

IF-57 xx Service and Maintenance

Service Interface and Connection

Details the service interface, required kits, and methods for establishing a service connection.

IF-57 xx Driver Installation and Initial Operation

Installing Drivers for Service Interface

Instructions for installing the USB to UART Bridge VCP driver for terminal service.

Initial Operation Procedure

Steps to be performed by authorized personnel for initial operation of the terminal.

IF-57 xx Security and Network Configuration

Changing Controller Password

Procedure for changing the device password using the 'passwd' Linux command.

Configuring Network Connection

Details on configuring network settings like IP address, gateway, and netmask.

Perform a Restart

Commands to restart the terminal, either warm boot or cold boot.

IF-57 xx Features and Technical Data

Establishing a Telnet Connection

How to establish a Telnet connection via IP address using root and default password.

Touch Screen Operation

Information on using the touch screen, including precautions for handling.

Proximity Sensor Functionality

Describes the proximity sensor's role in switching the terminal to power-saving mode.

Technical Specifications

Comprehensive list of electrical and general technical data for the IF-57xx terminal.

IF-57 xx Accessories and Expansion

Available Accessories

Lists optional items that can be ordered for the IF-57xx system.

Interface Expansion Module

Details the requirements and mounting of the Interface Expander for I/O and slave terminal connections.

Mounting the Interface Expander

Step-by-step guide for mounting the Interface Expander to the back panel.

Interface Expander Connections

Interface Expander Connections

Describes the connections for the Interface Expander, including RS485 BUS and I/O controller.

Connecting Interface Expander to IF-57 xx

Explains how to connect the Interface Expander to the IF-57xx master terminal using an 8-pin cable.

Interface Expander System Integration

Interface Expander to IF-57 xx Connection

Illustrates the connection of an Interface Expander to an I/O controller and another terminal.

Interface Expander Specifications

Provides technical data for the Interface Expander Board, including supply voltage and dimensions.

Serial Expansion

Serial Expansion Module

Describes the serial interface expander used to connect serial devices like barcode readers.

Fastening the Serial Expander

Instructions for mounting the serial expander to the back panel using screws and spacer sleeves.

Serial Expander Device Connectivity

External Device Connection

Explains connecting barcode readers or imagers using the RS232 interface of the serial expander.

Connection to IF-57 xx

Details the connection of the serial expander to the IF-57xx master terminal via a 5-pin cable.

Serial Expander Barcode Reader Integration

Connect Barcode Reader

Explains how to supply 5 VDC power to a barcode reader via the Interface Expander or an external supply.

Serial Expander Specifications

Provides technical data for the serial expander, including supply voltage and cable length.

Spacer Mounting

Spacer for Mounting

Describes the purpose and mounting of the IF-57xx spacer for surface-mounted cables or expanders.

Mounting the Spacer

Detailed instructions for mounting the IF-57xx spacer to the wall.

Spacer Cable Management and Types

Cable Laying with Spacer

Guidance on routing cables when using the spacer with PoE or external power supply.

Spacer Specifications

Provides technical data for the spacer, including dimensions and housing material/color.

Large Spacer

Describes the large spacer designed for accommodating less flexible or thicker cables.

Large Spacer Installation

Installing Terminal on Large Spacer

Illustrates how the IF-57xx master terminal is mounted onto the large spacer.

Mounting the Large Spacer

Diagram showing the dimensions and bore holes for mounting the large spacer.

Large Spacer Technical Data and Variants

Large Spacer Technical Data

Provides technical dimensions and color options for the large spacer.

IF-57 xx Variants (WLANCamera)

Lists order numbers for IF-57xx terminals available with WLAN or an integrated camera.

Disposal and Licensing

Disposal of the Device

Instructions on proper disposal of the device as electronic waste.

Open Source Packages

Information regarding open source license terms used in the product.