Interflex IF-5725-0 Series User Manual

Interflex Datensysteme GmbH 8/23
12 LEDs and Switches
1 Anti-tamper switch The anti-tamper switch triggers an alarm when the housing is opened. To suppress this
alarm, it must be turned off by a parameter setting in the time recording program.
2 Bus LED Indicates data traffic with one slave terminal.
3 Speed LED LED lights up only with 100Mb network connection.
4 Net LED LED lights up as soon as the terminal is detected by the network.
5 Reset button The Reset button ends active processes and triggers a reboot (restart).
6 SW switch 2 The SW switch is used to set the standard IP address 172.18.70.52 and temporarily
store the specified IP address.
7 Cold boot switch 1 The cold boot switch is used to delete stored data and set default parameters.
8 Power LED Lights up when operating voltage is switched on.
9 Adhesive tape The adhesive tape is applied over the mortise lock to prevent electrostatic discharges.
10 Battery Battery for clock

Interflex IF-5725-0 Series Specifications

General

Brand	Interflex
Model	IF-5725-0 Series
Category	Touch terminals
Language	English