Interflex IF15x - Disassembly of the Knob Module (with Disassembly Card)

8 Installation/Dismantling
Step 4: Reset disassembly mode, i.e. hold the disassembly card or an authorized
credential in front of the knob module.
Disassembly of the Knob Module (with
Disassembly Card)
Step 1:"Wake up" the knob module by turning it on (if necessary).
Step 2: Hold the disassembly card in front of the knob module.
The knob module switches to disassembly mode.
Step 3: Turn the knob module until the emergency power contacts are in the 9 o'clock
position.
Step 4: Disassemble the knob by turning it back and forth slightly while simultaneously
pulling it gently.