ePad Software License Agreement
This legal document is an agreement between you as the end-user (hereinafter, the “Licensee”) and Interlink
Electronics, Inc. (“Licensor”). BY USING THE ePad SOFTWARE (the “Software”), YOU ARE AGREEING
TO BECOME BOUND BY THE TERMS OF THIS AGREEMENT. THIS AGREEMENT CONSTITUTES
THE COMPLETE AGREEMENT BETWEEN LICENSEE AND LICENSOR. Grant of License: In consider-
ation of payment made, Licensor grants to Licensee, a non-exclusive right to use and display this copy of the
Software on a single computer (i.e., with a single central processing unit) at a single location. If the single
computer on which Licensee uses the Software is used by more than one person, the License covers all users on
that single computer, but does not cover multi-user or networked systems that may be used by more than one
person at a time. Licensor reserves all rights not expressly granted to Licensee. Ownership of Software: As the
Licensee, you own the magnetic or other physical media on which the Software is originally or subsequently
recorded or fixed, but Licensor retains the ownership of the Software recorded on the original disk copy and all
subsequent copies of the Software, regardless of the form or media in or on which the original and other copies
may exist. Copy Restrictions: The Software and the accompanying written materials are copyrighted. Unautho-
rized copying of the Software is expressly forbidden. Subject to these restrictions, Licensee may make one copy
of the Software, solely for back-up or archival purposes. Use Restrictions: As the Licensee, you may physically
un-install the Software from one computer and install it on another, provided that the Software is used only on
one computer by one person at a time. Licensee may not distribute copies of the Software or the accompanying
written materials to others. Licensee may not modify, adapt, translate or create derivative works based on the
written materials without prior written consent of the Licensor. Transfer: Any transferee of the Software shall be
bound by the terms and conditions of this agreement. Termination: This License will terminate automatically
without notice from the Licensor if Licensee fails to comply with any provisions of this License. Upon termina-
tion, Licensee must destroy the written materials and destroy and/or delete from Licensee’s computer all copies
of the Software, including modified copies, if any. Warranty: The disk licensee received containing the Software
was not prepared by Licensor, and Licensor assumes no liability whatsoever regarding its condition. Licensor
does warrant that the Software contained on the disk is free from material errors. If any error is discovered in the
Programming Code contained on the disk, Licensor may, at it’s discretion, correct the Code and may, upon
notice, provide Licensee with a disk containing the corrected Program, free of charge. EXCEPT FOR THE
ABOVE, LICENSOR GRANTS NO WARRANTIES, EXPRESS OR IMPLIED, BY STATUTE OR OTHER-
WISE, REGARDING THE SOFTWARE, THE DISK OR RELATED MATERIALS, THEIR FITNESS FOR
ANY OTHER PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY OR OTHERWISE. IN NO
EVENT SHALL LICENSOR BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR OTHER DAM-
AGES. In the event of a dispute concerning this agreement, the prevailing party shall be entitled to recover, in
addition to all other damages, reasonable attorney fees, costs and expenses. Governing Law: This Agreement is
governed by the internal laws of the State of California.
FCC Certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant
to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and if not installed and used in accordance with the instruction guide, may
cause harmful interference to radio communications. However, there is no guarantee that this radio
interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio-TV technician for help.
Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This product is equipped with shielded cable. Extension cables, if used,
must be shielded in order to comply with the emission limits.
To Next Page
Loading...