20 Advisor Advanced ATSx500A User Guide
3. If you do not have rights to inhibit the selected zone, the following warning is
displayed:
4. Press Clear to exit programming.
Shunting zones
1.2 Shunt zones
The shunt function is used to inhibit zones for a certain time period.
Enter the “Shunt zones” menu to switch zone shunts on or off.
1. Press Up or Down to scroll through the zones.
2. Press the zone number, or use Enter to select a zone.
3. Change the zone state using Up and Down.
4. Confirm the changes by pressing Enter.
5. Press Clear twice to exit programming.
To Next Page
Loading...
