Chapter 5: Menu reference
258 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
9 Dialler menu
The menu is used to program all system-wide communication options.
9.1 Central station
The Advisor Advanced system lets you program up to 16 central stations.
9.1.0 Add CS
Access the menu to add a central station.
If the central station is created successfully, the following message appears:
The new central station is given the default name “CS N” and placed on the end
of the central station list.
You can now start editing the central station details for the new central station.
9.1.n Select central station
Select a central station to program.
Note: Particular options in this menu differ for specific transmission paths. For
specific options, see:
• “PSTN and ISDN specific options” on page 263
• “IP and GSM/GPRS specific options” on page 263
• “Photo transmission specific options” on page 265
• “GSM/phone specific options” on page 265
Common options
9.1.n.1 CS name
Use the CS name screen to enter or change the central station name. Central
station name can consist of up to 16 characters.
To Next Page
Loading...
Need help?
General
