Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 259
9.1.n.2 Transm path
The transmission path defines the type of connection for reporting alarms to the
central station. Paths are defined in menu “9.3 Path options” on page 267.
9.1.n.3 Protocol
Choose the appropriate communication protocol.
Depending on the settings in “9.1.n.2 Transm path” above, the following
protocols can be available:
• SIA
• (X)SIA
• VOICE
• CID
• OH+SIA
• OH+XSIA
• OH+CID
• SMS TEXT
• SMS+CID
• SMS+SIA
• SMS+XSIA
• VOICE+SMS
• SMS+MMS
• OHPHOTO+CID
• OHPHOTO+SIA
• OHPHOTO+XSIA
• PHOTO+XSIA
9.1.n.5 Accounts
Account numbers identify alarm systems reporting to central stations. Account
numbers are 4 to 6 digits long (depending on the type of protocol). If set to None,
the reporting for the selected area is disabled.
Note: When using voice reporting, account codes are used to identify if alarms
for an area should be reported. The account code is not transmitted.
To Next Page
