Interlogix ATS4500A-IP-MM

Programming map
358 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
4.2 Areas
4.2.n Select area
4.2.n.1 Area name
4.2.n.2 Exit time
4.2.n.3 Entry time
4.2.n.2.1 Exit time 1
4.2.n.3.1 Entry time 1
4.2.n.2.2 Exit time 2
4.2.n.3.2 Entry time 2
4.2.n.2.3 PS Exit time 1
4.2.n.3.3 PS Entry time 1
4.2.n.2.4 PS Exit time 2
4.2.n.3.4 PS Entry time 2
4.2.n.4 Other timers
4.2.n.4.1 Warning time
4.2.n.4.2 Prealarm time
4.2.n.4.3 Unset delay
4.2.n.5 Set/unset options
4.2.n.5.1 Entry alarms
4.2.n.5.2 Set retry
4.2.n.5.3 Silent autoset
4.2.n.5.4 Dual unset
4.2.n.6 Hierarchy
4.2.n.7 Limits
4.2.n.7.1 Inhibit limit
4.2.n.7.2 Isolate limit
4.2.n.7.3 Shunt limit
4.2.n.8 Schedule
4.3 Area groups
4.3.n Select area group
4.3.n.1 AG name
4.3.n.2 Areas
4.4 RF fobs
4.4.0 Add fob
4.4.n Select fob
4.4.n.1 Fob name
4.4.n.2 Assigned user
4.4.n.3 Buttons
4.4.n.3.1 Select button
4.4.n.4 RF details
4.4.n.4.1 Sensor ID
4.4.n.4.2 Remove RF dev
4.4.n.5 Remove fob

