Interlogix ATSx500A Series - Device menu

Chapter 5: Menu reference
136 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
1.2.9.1 Test options
1>Panel
3 Exp
Use this menu to configure an automatic battery test.
First, select the panel or an expander to test the battery.
1.2.9.1.m Select device type
1>Expander 1
2 Expander 2
Select the appropriate device group.
1.2.9.1.m.n Select device
1>Test time
10
Select the appropriate device.
1.2.9.1.m.n.1 Duration
1 Duration
> 10<
Set duration (in minutes) for battery test.
Allowed range is 2 to 254.
1.2.9.1.m.n.2 Batt.test freq
2 Batt.test freq
>Disabled<
Set automatic battery test frequency. The following values are available:
• Disabled
• Every working day
• Every Monday
• First Monday of month
• Everyday
1.2.9.2 Man. Bat. test
1>Panel
3 Exp
The menu allows you to perform a manual test of the device battery.
1.2.9.2.m Select device type
1>Exp 1
2 Exp 2
Select the appropriate device group.