Need help?Do you have a question about the Interlogix ZeroWire and is the answer not in the manual?
General| Partitions | 1 |
|---|---|
| Z-Wave | Yes |
| Battery Backup | Yes |
| Frequency | 319.5 MHz |
| Communication | Cellular |
| Compatibility | Interlogix compatible devices |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Humidity | non-condensing |
Instructions for arming the security system in Away Mode using PIN code or quick arm feature.
Explains how to arm the system when some zones are not secure.
Details different Stay Modes for securing the premises while occupied.
Guide to arming the system in Stay Mode, allowing movement inside.
Describes modified Status Key behavior for EN Grade 2 systems.
Steps for disarming the system and options for entry delay modification.
Explanation of Exit Error and Fail To Close conditions and their logging.
How to bypass zones temporarily and how they are reset.
Procedure to reset latching detectors after an alarm.
Details of Master user capabilities and default credentials.
Details of Engineer user capabilities and default credentials.
Step-by-step guide to adding a new user to the system.
How to modify a user's type (e.g., Master, Standard).
Information on purchasing and programming additional keyfobs.
How to send user PINs from ZeroWire to a Z-Wave door lock.
Overview of UltraConnect app features and capabilities.
How to set or change the Web Access Code for remote access.
Requirements for UltraConnect app username and PIN.
How to view camera live streams and recorded clips via the app.
Lists the capabilities and functions of the ZeroWire Web Server.
Instructions for connecting the ZeroWire to a network via WiFi.
Instructions for connecting the ZeroWire to a network via Ethernet.
Common problems and solutions for network connectivity.
How to adjust the system's volume level.
How to turn voice annunciation for arming/disarming on or off.
How to enable/disable full descriptions in the main menu.
How to set run mode and idle mode backlight brightness levels.
How to set partition entry and exit delay times.
How to record custom zone names using your voice.
How to record entry or exit messages for users.
How to add or remove zones from the chime group.
Steps to configure email reporting settings via Web Server/UltraConnect.
Steps to add cameras to the UltraConnect app.
How to program cameras to record clips based on specific events.
How to view event-triggered video clips from the History screen.
How to view recorded clips directly from the Cameras tab in the app.
Steps to resolve issues with receiving notifications from the app.
Steps to enable location services for the UltraConnect app.
How to program scenes for ZeroWire to respond to location events.
Tips for ensuring Location Services work correctly and troubleshooting issues.
How to perform a zone walk test from the keypad or app/web page.
How to test the system's sirens.
How to perform a test on the backup battery.
How to test the system's communicator to the central station.
Overview of the main menu options available on the system.
Information on obtaining the full installation manual.
Common error messages related to menu navigation.
Common error messages related to data saving and access.
Error message when no sensors are configured.
Messages related to AC power, battery, and tamper status.
Describes sensor states like 'In Alarm', 'Bypassed', 'Trouble'.
Lists key features and benefits of the ZeroWire system.
To Next Page
