12 ZeroWire User
Manual
Basic Features
Arm your system in Away Mode
Protect your property using Away Mode when you are leaving the premises.
Normally zones must be secure before you can arm in Away Mode, this will be indicated
by the Ready Light being lit a solid green.
If the Ready Light is flashing green then “forced arming” is enabled. This means some
zones are not secure but you can still arm your security system. Read more about the
Forced Arming Feature on the next page.
If the Status Key is not green press the Status Key to hear what zones are not secured.
You may arm your system using your user PIN code:
READY STATUS
Check ready key is green.
Check status key is green.
1.
AWAY
Select the Away Mode.
2.
3.
Leave the premises.
To silence the Exit Delay beeping, press the Away Key again and the beeping will stop.
This can also be performed from the UltraConnect app.
USER PIN CODE ENTER
EXIT DELAY BEEPS
All partitions
now protected
Druk
Away
Ready Light
is green
To Next Page
Loading...
Need help?
General
