60 ZeroWire User Manual
Testing Your System
System Tests
Your security system is only as effective as each of the components. This includes your
sirens, communicator, back up battery, and detection devices.
Each of these should be tested at least once per week and maintained to provide the
highest level of security. Failure to conduct regular testing can result in system failure
when most required.
The four system tests to perform are:
Perform a Walk Test
This is an important test to use regularly to verify that each zone is working correctly.
Example: How to perform a zone walk test from the keypad.
1.
Select main menu - Option 4, System Test.
2.
3.
Select zone walk test.
4.
Walk past each motion detector, open
and close windows and doors with
detectors.
The ZeroWire will chirp the siren and announce the
zone name and the signal level of each detector that is
triggered.
5. Hear the status of each zone that has been tested.
6.
Exits from System Test.
Example: How to perform a zone walk test from the app or web page.
1. Log in to the ZeroWire.
2. Click Settings – Walk Test.
MENU 4
YOUR 4 TO 8 DIGIT MASTER CODE
ENTER
4
STATUS
MENU MENU MENU
To Next Page
Loading...
