ZeroWire User Manual 59
• If you are testing the Location Services feature, you must move at least 300m away
from the home location for the app to detect you have exited. To detect returning to the
home location you must move within 200m. This is designed to account for GPS errors
and prevent accidental triggering of location services alerts.
• If your home location does not appear accurate, return to the Edit Map screen and
zoom in using a “pinch-out” gesture. Then set the red pin on the location with greater
accuracy. Ensure you click the Save Map button.
• Take care when creating Scenes with Location Services for multiple users on separate
devices. Improper programming may lead to conflicting behaviour on the ZeroWire.
Selecting the appropriate “Activate User Number” in the Scene programming may be
beneficial.
• Take care when using the Arm and Disarm actions. For example if Geosphere Exited is
programmed to Arm an Area, other users may still be present inside the protected area
which would cause the ZeroWire to go into alarm.
Move outside 300 m of the home location
to trigger an “exited” event.
Move within 200 m of the home location
to trigger an “entered” event.
To Next Page
Loading...
Need help?
General
