ZeroWire User Manual 41
Configure Zone Names
All zones can be named using the library words on page 65. This makes it easier to
identify the correct zone in the event of a condition. You may enter up to eight words to
achieve your desired description.
Example: Configure zone 1 name as “Dining Room Zone”
1.
Select main menu - Option 8, Basic system
configuration.
2.
3.
Select zone name recording.
4.
Select zone 1.
5.
Select word “Dining” from word library.
Select word “Room” from word library.
Select word “Zone” from word library.
6.
Exits from Advanced system configuration.
If you do not require all eight words, just press MENU as in step 6 after you have entered
the last word number.
Record Zone Names
You can also record the names of 64 zones using your voice.
Example: Record zone name for zone 1.
1.
Select main menu - Option 8, Basic system
configuration.
2.
3.
Select zone name recording.
4.
Select zone 1.
5.
Activate recording mode.
6.
Record voice, maximum 2 seconds.
7. Stop recording mode.
8.
Exits from Advanced system configuration.
MENU 6
YOUR 4 TO 8 DIGIT MASTER CODE
ENTER
4
1 ENTER
5 3 ENTER
1 1 7 ENTER
1 2 1 ENTER
MENU MENU MENU
MENU 6
YOUR 4 TO 8 DIGIT MASTER CODE
ENTER
4
1 ENTER
HOLD DOWN HISTORY
( ( SPEAK NAME ) )
RELEASE HISTORY
MENU MENU MENU
To Next Page
Loading...
