Chapter 5: Menu reference
142 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
2 Device menu
1>Inst. Remotes
2 Edit Rkp&Exp
Device menu allows you to view and configure bus devices: keypads (RASes),
expanders (DGPs), and readers.
For more information on keypads and expanders, see Chapter 3 “System
functions > Bus devices” on page 58.
For more information on readers, see “Access control” on page 68.
For bus device numbering, see “Bus device numbering” on page 58.
2.1 Installed remotes
1>Keypad devices
2 Exp devices
The Installed remotes menu shows the status of all connected remote keypads
and various system and local expanders.
Note: The maximum number of devices allowed on the databus is given in
“General features” on page 36.
Select a device type to display.
2.1.1 Keypad devices
2.1.2 Expander devices
The bottom line has a list of device states; each device state is shown as one
character, which can be one of the following.
• ?: Device is currently being read
• x: Device is offline or not supported
• I: Device is configured but isolated
• R: Keypad is online and configured (polled)
• r: Keypad is online, but not configured (new)
• D: Expander is online and configured (polled)
• d: Expander is online, but not configured (new)
• M: MI bus expander is online and configured (polled)
• m: MI bus expander is online, but not configured (new)
• c: MI bus expander is online, but its address is in conflict with another
expander
• O: ATS74xx series IP/GPRS dialler is online and configured (polled)
• —: No device
To Next Page
Loading...
