Interlogix ATSx500A Series - Page 273

Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 267
9.2.2 Voice mapping
01>AN Msg number
0
The Voice mapping menu allows you to assign a particular voice message
(0 to 14) to each system event. 0 means that no message is assigned.
The list of events is shown in Appendix A “Advisor Advanced events” on page
311.
9.2.3 Delayed events
0>Delay timer
0
The Delayed events menu allows you to set a delay for particular events.
The first menu entry, “0 Delay timer”, allows you to set the global reporting delay
from 0 to 250 sec.
The next menu entries represent the particular events. If the option is On, the
delay is applied.
01>AN Delayed
Off
For the list of events, see Appendix A “Advisor Advanced events” on page 311.
9.3 Path options
1>PSTN
4 IP
The Path options menu allows you to configure options for available transmission
paths.
9.3.n Select path
1>Path name
PSTN
Select the appropriate transmission path to configure its options.
Available transmission paths depend on the system configuration. By default, the
following transmission paths are available:
• IP
Depending on the hardware configuration, the following transmission paths may
also be available:
• PSTN
• ISDN
• GSM
• TDA74xx