Chapter 5: Menu reference
286 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
9.4.1.n.4.2 Destination port
The Destination port defines which IP port is used to establish the selected PC
connection.
9.4.1.n.4.3 Ping host
The Ping host command allows you to send a ping to the selected PC. This
command is used to check if the PC is present and accessible from the panel in
the network.
The Tx/Rx value indicates a number of packets sent and received.
GSM specific options
9.4.1.n.3 Conn. type
The Connection type menu defines what GSM connection is used. The following
options are available:
• CSD: The modem functionality is used.
• GPRS: The GPRS functionality is used.
To Next Page
Loading...
