Interlogix Simon XT User Manual

10 Simon XT User Manual
2. Enter your code when the display shows Enter Code.
The panel displays and speaks Disarmed, the Disarm button lights up, and
the panel beeps once.
To arm doors and windows (level 2):
1. Ensure that all doors and windows are closed.
2. Press Doors+Windows.
3. Enter your code when the display shows Enter Code, if a code is required.
The panel displays Doors + Windows, speaks Doors and Windows On, and
the Doors+Windows button lights up.
The panel starts an exit delay and sounds exit beeps in groups of two until the
exit delay expires.
To arm motion sensors (level 3):
1. Press Motions.
2. Enter your code when the display shows Enter Code, if a code is required.
The panel displays Motions, speaks Motions On, and the Motions button
lights.
The panel starts an exit delay and sounds exit beeps in groups of three until
the exit delay expires.
To arm doors, windows, and motion sensors (level 4):
1. Press Doors+Windows.
2. Enter your code when the display shows Enter Code, if a code is required.
3. While the panel is in the process of arming, press Motions.
The panel displays Doors + Windows & Motions, speaks Doors and
Windows On, Motions On, and the Doors+Windows and Motions buttons light
up.
The panel starts an exit delay and sounds exit beeps in groups of four until
the exit delay expires.
Exit/entry delay
Your Simon XT provides a delay after entering or exiting your home before the
system is alarmed. Table 5 on page 11 provides details for the entry and exit
delay features.

Interlogix Simon XT Specifications

Power

power requirements	6V nominal
standby current	30mA (10mA in PowerSave Mode)
peak current	1.7 A

Operating Environment

operating temperature	32 to 120°F (0 to 49°C)
storage temperature	-30 to 140°F (-34 to 60°C)
max. relative humidity	90% non-condensing

Dimensions

height	4 1/16 in.
width	1 7/8 in.