18 TruVision HD-TVI 1080P Camera Configuration Manual
SHARPNESS Adjust the value from 0 to 15. The higher the value, the clearer and
sharper the image appears.
MONITOR Select CRT or LCD.
CRT: Set the black level [-30 to +30], blue gain [-50 to +50], and red
gain [-50 to +50].
CRT
1. BLACK LEVEL ----|----+0
2. BLUE GAIN ----|----50
3. RED GAIN ----|----60
4.RETURN RET
LCD: Set gamma, blue gain [0 to100], and red gain [0 to100].
Gamma is the name of a nonlinear operation used to code and
decode luminance or tristimulus values in video or a still image
system. The options are: USER +Y, USER, AUTO, 1.00, 0.95, 0.90,
0.85, 0.80, 0.75, 0.70, 0.65, 0.60, 0.55, 0.50, and 0.45 are selectable.
LCD
1. GAMMA AUTO
2
. BLUE GAIN
----|----
50
3.
RED GAIN ----
|----50
4.RETURN RET
LSC Lens Shading Correction.
Corrects image shades at the corners of an image. Set ON/OFF to
enable/disable.
VIDEO OUT Select the video output, PAL or NTSC.
Reset
Reset all settings to back default.
Exit
Press OK to exit the menu.
To Previous Page
Loading...
