Need help?Do you have a question about the Interlogix TVT-5305 and is the answer not in the manual?
General| IR Range | Up to 30m (98ft) |
|---|---|
| Video Compression | H.264 |
| Frame Rate | Up to 30fps |
| Bit Rate | 32 Kbps to 8 Mbps |
| Power Supply | 12V DC, PoE (802.3af) |
| Network Interface | RJ-45 |
| Protocols | TCP/IP, HTTP, HTTPS, FTP, SMTP, DHCP, DNS, DDNS, NTP, RTSP, RTP, UDP, ICMP, IGMP |
| Onboard Storage | MicroSD card slot |
| IR Night Vision | Yes |
| Connectivity | RJ45 |
Step-by-step guide for camera activation using a web browser interface.
Define network parameters for camera access.
Configure video and audio recording parameters.
Adjust image settings like brightness, contrast, and sharpness.
Manage user access, passwords, and security services.
Configure motion detection, tamper-proof, and alarm events.
Configure advanced event detection like cross line and intrusion.
Configure storage devices, NAS, and snapshots.
Configure NTP or manual time synchronization.
Configure IP address, subnet mask, and gateway.
Set HTTP, RTSP, HTTPS, and server ports.
Configure stream type, resolution, bit rate, and frame rate.
Configure automatic or scheduled day/night mode switching.
Adjust brightness, contrast, saturation, and sharpness.
Define detection areas and sensitivity for motion alarms.
Set the schedule for when motion detection is active.
Define when motion detection triggers recording.
Configure alarm responses for motion detection events.
Add, delete, and modify user accounts and permissions.
To Next Page
