Need help?Do you have a question about the Interlogix TVD-5304 and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Night Vision/IR Range | Up to 30m |
| Power Supply | 12V DC, PoE (802.3af) |
| Network Interface | 10/100 Mbps Ethernet |
| Video Compression | H.264 |
| Day/Night | Auto IR cut filter |
| Frame Rate | 30 fps at 720p |
Guides activation via web browser or TruVision Device Manager.
Configures IP address, subnet mask, gateway, DNS, and MTU settings.
Adjusts stream type, resolution, frame rate, quality, and encoding.
Defines motion detection areas, sensitivity, and schedules for alarm triggers.
Detects objects crossing a predefined line, specifying direction and sensitivity.
Sets defense regions to trigger alarms when someone enters the area.
Defines recording schedules based on time and event triggers.
Manages users, permissions, and passwords for camera access control.
Details how to log in and out of the camera's web interface and handle password prompts.
Accesses the live view mode to see real-time video from the camera.
Allows searching and playing back recorded video stored on NAS or SD card.
To Next Page
