Need help?Do you have a question about the Interlogix TVD-5301 and is the answer not in the manual?
General| Camera Type | Dome |
|---|---|
| Sensor Type | CMOS |
| Resolution | 2592 x 1944 |
| Lens Type | Varifocal |
| Night Vision | Yes |
| Video Compression | H.264, MJPEG |
| Frame Rate | Up to 30 fps |
| Network Interface | 10/100 Ethernet |
| Power Supply | 12 VDC ± 10%, PoE (802.3af) |
| Operating Temperature | -22 °F to 140 °F (-30 °C to 60 °C) |
| Ingress Protection | IP66 |
| Image Sensor | 1/3" CMOS |
| IR Range | Up to 30m |
| Minimum Illumination | 0.01 Lux |
| Viewing Angle | H: 79° - 36°, V: 56° - 27° |
| Compression | H.264 |
Configure browser security, ActiveX, and activate the camera with a password.
Explore the web interface for camera viewing, recording, and management.
Configure system parameters, time synchronization, restore defaults, and upgrade firmware.
Set up TCP/IP, ports, DDNS, PPPoE, SNMP, 802.1X, QoS, FTP, UPnP, Email, NAT, HTTPS.
Adjust video/audio parameters, image quality, exposure, and day/night modes.
Customize OSD text, overlay text, and define privacy mask areas on the image.
Define motion detection areas, sensitivity, schedule, and response linkage.
Configure tamper-proof alarms and system exceptions like HDD errors or network disconnections.
Set up cross line and intrusion detection with defined areas, sensitivity, and schedule.
Configure external alarm inputs and outputs, including their arming schedules and linkage.
Set up scheduled and event-triggered snapshots, format, resolution, and quality.
Configure Network Attached Storage (NAS) and manage storage devices like SD cards.
Define pre-record, post-record times, and create custom recording schedules.
Manage user accounts, permissions, RTSP authentication, IP address filtering, and SSH.
Access live view, record video, play back recorded footage, and archive data.
Search event logs by type and time, and operate PTZ functions like presets and tours.
To Next Page
