60 TruVision Series 3 IP Camera FW3.1 Configuration Manual
You need to upgrade firmware when it has become outdated. When you upgrade
the firmware, all existing settings are unchanged. Only the new features are
added with their default settings.
The camera will select the corresponding firmware file automatically. Cookies
and data in the web browser are automatically deleted when the firmware is
updated.
To upgrade firmware version:
1. Download on to your computer the latest firmware from our web site at:
www.interlogix.com/video/product/truvision-ip-open-standards-outdoor-
cameras/
- Or -
www.utcfssecurityproductspages.eu/videoupgrades/
2. When the firmware file is downloaded to your computer, extract the file to the
desired destination.
Note: Do not save the file on your desktop.
3. Click Configuration > System > Maintenance.
4. Select the Firmware or Firmware Directory option. Then click the Browse
button to locate latest firmware file on your computer.
Firmware directory – Locate the upgrading folder of Firmware files. The
camera will choose the corresponding firmware file automatically.
Firmware – Locate the firmware file manually for the camera.
Note: Please select Interlogix_Gen_3_ipc.dav for product models listed in
“Introduction” on page 3.
5. Click Update. You will receive a prompt asking you to reboot the camera.
6. When the upgrade is finished, the device will reboot automatically. The
browser will also be refreshed.
Reboot camera
The camera can be easily rebooted remotely.
To reboot the camera through the web browser:
1. Click Configuration > System > Maintenance.
2. Click the Reboot button to reboot the device.
3. Click OK in the pop-up message box to confirm reboot operation.
To Next Page
Loading...
