42 TruVision Series 3 IP Camera FW3.1 Configuration Manual
Alarm inputs and outputs
To define the external alarm input:
1. Click Configuration > Basic Event > Alarm Input.
2. Choose the Alarm Input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Enter a name for the alarm input.
3. Click Edit to set the arming schedule for the alarm input. See “Motion
detection alarms” on page 36 for more information.
4. Check the desired check box to select the linkage method.
5. Click Save to save changes.
To Next Page
Loading...
