TruVision Series 3 IP Camera FW3.1 Configuration Manual 43
To define the alarm output:
1. Click Configuration > Basic Event > Alarm Output.
2. Select an alarm output channel from the Alarm Output drop-down list. You
can also set a name for the alarm output.
3. The delay time can be set to 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min.
The delay time refers to the time duration that the alarm output remains in
effect after the alarm occurs.
4. Click Edit to set the arming schedule for the alarm input. See “Motion
detection alarms” on page 36 for more information.
5. Click Save to save changes.
To Next Page
Loading...
