Intermatic ET90000 Series User Manual

www.intermatic.com
7777 Winn Road
Spring Grove, IL 60081
Manual No. 158--01050-REVA
ET90000 Series
Electronic Timer
Installation and Programming Guide
• Do not attempt to install or use your Intermatic product until you have read the safety instructions in this section. Save this
document and keep it in an easily accessible place.
• To avoid fire, shock, or death, turn off power at circuit breaker and test that power is off before wiring.
• Observe all national and local electrical and safety codes.
• Disconnect power when servicing or changing loads.
• Alterations or modifications to the device will create a hazard.
• Use copper conductors only. Use 10 AWG wire, minimum 105°C for 30 Amp loads.
• For outdoor locations, rainproof or wet location conduit hubs that comply with the requirements of UL 514B Conduit, Tubing,
and Cable Fittings for outdoor use, must be used.
Risk of Fire or Electric Shock
WARNING

Intermatic ET90000 Series Specifications

General

Series	ET90000
Category	Control Panel
Display	LCD
Battery Backup	Yes
Type	Electronic Timer
Voltage	120-240 VAC
Programming	7-Day

Summary

Safety Warnings

Quick Start Guide

Mount Unit

Guide on how to mount the timer unit to a stable surface.

Connect to Power

Instructions for connecting the timer unit to a power source safely.

Install Wiring

Guidance on wiring applications to the timer device.

Program Basic Information

Steps for inputting current date, time, and programming an event.

Product Description

Power Ratings and Load Examples

Specifications for input/output power and maximum loading calculations.

Technical Data

Installation

Connect to Power

Install Wiring

Adding Relay Boards

Remote Switch Installation

USB Port Functions

Manual On/Off Control

Controls

Programming

Initial Setup

Procedure for setting the initial date, time, and time zone for the timer.

Programming Events

Steps for creating and configuring events, including circuit type, name, and control.

Programming Holidays

Instructions for programming holidays to override or modify normal event schedules.

Advanced Options

Date/Time Configuration

Options for configuring date, time, and daylight saving time settings.

Astronomic Configuration

Setting up astronomic zones and adjusting calculated times for sunrise/sunset.

Circuit Configuration

Zone Configuration

Holiday Configuration

Add Holiday

Event Configuration

Add Event

System Configuration Options

Program Copy/Restore

Network Setup