Intermatic T40000R4 User Manual

T40000R SERIES W/INTERNAL COMPARTMENT
POOL/SPA EQUIPMENT CONTROLS
INSTALLATION
OPERATION &
SERVICE MANUAL
CONTROL PANEL WITH TIME SWITCH FOR INDOOR/OUTDOOR USE
Suitable for Pool Equipment Control and for Direct Connection of Underwater Lights
ELECTRICAL RATINGS: See inside Enclosure Door
Many of today’s energy efficient pools and spas
utilize the advantages of a single electrical panel,
containing all the necessary controls for the safe,
efficient and automatic operation of the pool/spa
equipment. In addition, this Panel can also be
used to control any outdoor equipment, sign or
pump within its rated capacity.
The all-weather enclosure contains none one or
two heavy-duty, industrial grade Time Switches.
Also, it has provisions to install switches or a
GFCI receptacle on the side as well as the inside.
The Time Switch can also accommodate an
optional heater control (fireman) switch.
The Control is designed to operate any pump,
within its rated capacity. However, if protection
to prevent dry start is required by the pump
manufacturer, it must be provided in addition
to this Control. Contact pump manufacturer
if not sure and/or for more details.
DANGER! TO AVOID RISK OF INJURY:
...do not permit children to operate the Control Unit or use the Pool/Spa unless they are closely supervised at all times.
...test GROUND FAULT protection regularly. If it fails to reset, DO NOT USE THE POOL or SPA!
Contact a qualified service technician.
...always disconnect electricity before servicing this control or the equipment connected to it.
READ, FOLLOW AND SAVE THIS INSTRUCTION MANUAL
GENERAL INFORMATION
1

Intermatic T40000R4 Specifications

General

Brand	Intermatic
Category	Control Panel
Amperage	40 A
Poles	2
Number of Poles	2
Enclosure	NEMA 3R
Current Rating	40 A
Horsepower Rating	2 HP
Type	Time Switch
Timing	24 Hour

Summary

Control Panel Overview

General Information

Explains the panel's function for pools, spas, and outdoor equipment, highlighting its energy efficiency benefits.

Critical Safety Warnings

Essential safety instructions to prevent injury, including supervision and electrical disconnects.

Installation Procedures

Safety and Code Compliance

Emphasizes installation by qualified electricians and adherence to National/Local Electrical Codes.

Mounting and Conduit Preparation

Details selecting a location, mounting the enclosure, and preparing conduit runs for wiring.

Wiring and Component Installation

Guides wiring connections, installing optional switches, and accommodating devices like GFCI receptacles.

Bonding and Testing Protocol

Covers requirements for external bonding and a procedure for testing the installation's functionality.

Operation and Settings

Filter Pump Time Switch Setup

Instructions on setting ON/OFF times, manual operation, and daily cycle programming.

Fireman Switch Operation

Explains the automatic heater protection function that shuts off the heater before the pump.

Troubleshooting Guide

Common Issues and Solutions

Lists symptoms like incorrect timing, dial stops, or dead motors with corresponding corrective actions.

Wiring Diagrams and Warranty

Electrical Connection Schematics

Provides diagrams for typical 120V, 240V, and timer inter-connections for pool equipment.

Limited One Year Warranty

Outlines the terms and conditions of the product's limited warranty coverage.