Thank you for purchasing Intermatic’s HomeSettings devices. With the HomeSettings program you can reliably
and remotely control lighting and appliances.
The outstanding features of the HomeSettings HA05 Screw-in Lamp Module includes:
• Feedback that will allow you to see whether your device has received the ON/OFF (you cannot DIM with
this module) signal.
• RF signal reliability – each HomeSettings product has a special feature that virtually guarantees that
RF signals are received
• Ease of installation
• Manual override
• Weather resistant housing
• Controls compact fluorescent lights up to 42 Watts
• Compatible with other Z-wave™ enabled devices
The HA05 Screw-in Lamp Module is a Z-wave
™ enabled device and is fully compatible with any Home Settings
network and any Z-wave™ enabled network. Z-wave™ enabled devices displaying the Z-wave™ logo can also
be used with Home Settings modules and controllers regardless of the manufacturer, and Home Settings
modules and controllers can also be used in other manufacturer’s Z-wave™ enabled networks. Each module in a
Home Settings network is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that
the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.
1.
Screw the
HA05 Screw-in Lamp Module into a
medium base lampholder that supplies 120VAC,
60Hz.
2.
Screw a lightbulb (up to 300 W
atts open-air
installation) or a compact fluorescent bulb
(up to 42 Watts) into the module.
3.
T
o manually turn ON the
HA05 Screw-in Lamp
Module, press and release the Program/ON/OFF
button. The green indicator LED will turn ON, and
the lightbulb screwed into the
HA05 Screw-in Lamp
Module
will also turn ON.
4.
T
o manually turn OFF the
HA05 Screw-in Lamp
Module, simply press and release the
Program/ON/OFF button. The green indicator will
turn OFF and the lightbulb screwed into the HA05
Screw-in Lamp Module will also turn OFF.
If the lightbulb does not turn ON, check to make sure that the lightbulb is seated properly
, and check to make
sure that your lightbulb is not broken or defective.
Intermatic Inc., Spring Grove, IL
60081- 9698 www
.intermatic.com
INSTALLATION
MODEL HA05
SCREW-IN LAMP MODULE
F
or use in dry, damp or
wet locations.
To Next Page
Need help?
General
