Intermatic HB88RC Timer Instructions
Outdoor Lighting Perspectives – Intermatic Timer (HB88RC)
Features include: 7 Day/7 Event programming, Multiple Daily Programming Options,
Battery Backup to retain settings during power outage and Easy Programming.
SETTING THE CLOCK
While holding the Clock button down:
1. Press the DAY button until the display shows the current day.
2. Press the HOUR button until the display shows the current hour.
3. Press the MIN (MINUTE) button until the display shows the current minute.
SETTING PROGRAMS
Press the PROG (Program) button once.
You will now set up the time in which you want your device turned ON:
1. The number 1 in the lower left hand corner indicates that you are now programming EVENT 1.
2. Press the Day button repeatedly until the display shows the day in which you want the timer to turn on.
The options are:
a. All days of the week (MO TU WE TH FR SA SU) (This will likely be the choice for your lighting)
b. Individual days of the week (MO, etc)
c. Weekdays only (MO TU WE TH FR)
d. Weekends only (SA SU)
3. PRESS the HOUR and MIN (Minute) buttons to set up the time of day when you want the timer to turn on.
4. Press the PROG (Program) button once again.
5. You will now set up the time in which you want your device turned OFF, in EVENT1.
Repeat the ON and OFF program procedures outlined above for each Lighting event (up to 7 events), as
needed.
When programming is complete, press the CLOCK button to return to the current time display.
REVIEWING YOUR EVENT PROGRAMMING
1. In the current time display, press the PROG (Program) button repeatedly to check your settings.
2. When finished, press CLOCK to return to the current time display.
To Next Page
Need help?
General
