Intermec CK3a

Appendix B — Default Settings
CK3 Mobile Computer User’s Manual 99
Application Connection Settings
Application Connection Setting Default Value
Allow External BRI Connections Enable
BRI TCP Port 2189
Enable Logging Disable
Reader 1 Settings
Reader 1 Setting Default Value
Enable Reader Disable
Reader Model IP30
RFID Module Settings
RFID Module Setting Default Value
Tag Type EPC Class 1 Gen2
Dense Reader Mode Disable
LBT Channel 5
LBT Scan Enable Enable
Field Separator Space ()
ID Report Enable
No Tag Report Disable
Report Timeout 0 ms
Timeout Mode Disable
ID Timeout 100 ms
Antenna Timeout 10 ms
ID Tries 3
Antenna Tries 3
Read Tries 3
Write Tries 3
Initialization Tries 1
Lock Tries 3
Select Tries 1
Unselect Tries 1