Intermec EasyLAN 10I2 Quick Start Guide

EasyLAN 10i2 Ethernet Adapter Quick Start Guide 5
Introducing the EasyLAN 10i2 Adapter
The external EasyLAN
™
10i2 Ethernet adapter (P/N
072885) and the internal EasyLAN 10i2 Ethernet adapters
(P/N 072894 and P/N 072884) let you share your
available printer resources with everyone connected to your
Ethernet network. Throughout the guide, “EasyLAN 10i2
adapter” is used to refer to both the internal and external
adapter unless otherwise specified.
You can only connect the external EasyLAN 10i2 adapter
to these printers:
• EasyCoder 91* • EasyCoder 601XP
• EasyCoder 301/E4* • EasyCoder 4630*
• EasyCoder 401* and
401LL*
• EasyCoder 7421,
PC41, and 7422*
• EasyCoder 501*, 501E*,
501S*, and 501XP
• ColorCoder 901/V4*
• EasyCoder C4, PC4, and
PC41
* These printer models require an external power supply to run
the EasyLAN 10i2 adapter.
You can connect either the external or the internal
EasyLAN 10i2 adapter (P/N 072894) to these printers:
• EasyCoder 3240
• EasyCoder 3400D and earlier and EasyCoder 3440
• EasyCoder 3600
Note: To connect the external adapter, the
printers must have the parallel port option
installed.
You can connect the internal EasyLAN 10i2 adapter (P/N
072884) to these printers:
• EasyCoder 3400e
• EasyCoder 4420 and 4440

Intermec EasyLAN 10I2 Specifications

General

Brand	Intermec
Model	EasyLAN 10I2
Category	Adapter
Language	English