Interphone SHAPE User Manual

CHAPTER 3 - BATTERY CHARGE
Insert the micro USB charging cable in the special intercom connector, as shown in the
picture. Connect the cable to a standard USB charger.
LED indications:
- red LED: charging.
- green LED: fully charged
CHAPTER 4 - BASIC CONFIGURATION
Turn the device on
Press MFB until the blue LED comes on.
Turn the device off
Press MFB until the red LED lights up and the device turns off.
Activate / Deactivate automatic volume control
1. With the device off, press MFB until the second beep. Led will flash red/blue.
2. To activate, press Volume + until the first beep. Led will flash green for 4 seconds.
3. To deactivate, press Volume - until the first beep. Led will flash red for 4 seconds.
Activate / Deactivate phone calls voice answer
1. With the device off, press MFB until the second beep. Led will flash red/blue.
2. To activate, press Volume + until the second beep. Led will flash green for 4 seconds.
3. To deactivate, press Volume - until the second beep. Led will flash red for 4 seconds.
Factory Reset
With the device off, press together MFB and Volume + and Volume – until the device switches on. All
settings and pairings will be erased.
CHAPTER 5 - TELEPHONE / GPS
Pairing
1. With the device off, press MFB until the second beep. Led will flash red/blue.
2. Start searching for new devices on the mobile phone / GPS
3. Select the intercom on the phone / GPS “interphone shape”.

Interphone SHAPE Specifications

General

Brand	Interphone
Model	SHAPE
Category	Intercom System
Language	English