Interphone SHAPE User Manual

4. Once the pairing has been confirmed, the LED will flash BLUE twice, every three
seconds.
Answering a call
Just say loudly “HELLO” or short press MFB
Voice dial
Short press MFB
Redial last number
Double press MFB
CHAPTER 6 – MUSIC
Enable/disable playback from the phone
Press MFB until the second beep.
Next track
On music playback, press Volume + until the first beep.
Previous track
On music playback, press Volume - until the first beep.
Share the music with another intercom
On music playback, press Volume + until the second beep. To stop sharing, press Volume - until the
second beep.
CHAPTER 7 – INTERCOM
Pairing with another Interphone device (for the first time only)
1. With both the intercom devices off, on each unit press power-on button until led will flash
red/blue.
2. Press once MFB button on Interphone SHAPE, units will pair and connect.
Pairing with a NON-Interphone device (for the first time only)
1. In the NON-Interphone unit, start the telephone search/pairing mode; refer to the user manual of
the intercom to be paired.
2. With Interphone SHAPE off, press MFB until led will flash red/blue.
3. Press once MFB button on Interphone SHAPE, units will pair and connect.
Two way intercom talk
On one unit only, press MFB until the first beep.
To stop communication, on one unit only, press MFB until the first beep.

Interphone SHAPE Specifications

General

Brand	Interphone
Model	SHAPE
Category	Intercom System
Language	English